Trip computer for messauring speed, distance, 0-100km/h, etc.

Status: Done, in use/depricated.

Trip computer for car messuring velocity, max velocity, total distance, current distance, time for the distance 402 m and 1000 m and time for 0-100km/h.

16×2 lines display with menu buttons below.

The controller used is a PIC16F628 messauring time between pulses from a HAL-sensor in the front right wheel. and by knowing the circumference above mentioned quantitys can be calculated.

N/A

N/A

The firmware is written in HI-TECH PICC using MPLAB.

All information found on this page are licensed. See the license page for more information.